Serpent SRX8-GTe 1/8th scale electric powered GT RC car

Description

This is a an almost ready to run kit (ARR). This Kit is a brand-new prebuilt 1/8 scale GT car. This is the ultimate in speed racing cars and comes with aluminum and carbon fiber parts, no plastics on this kit. This car will seer off the first layer of tarmac on speed runs and is equipped with a 2150kv motor, 6s capable esc, 20kg servo, SP Racing pre-mounted belted wheels, painted body, battery straps, and a 22-tooth hardened steel motor pinion gear. All you need is a radio system, aluminum servo arm, and batteries. All electronics and car are brand new!
This car is a high-quality machine and must be operated safely as in its current state, it is capable of 70-80mph!
See below for equipment included in the car.
SKY RC TS150 Pro Aluminum SK-300076
Constant/Burst Current
150A/950A
Motor Compatible
Brushless Sensor & Sensorless ESC
Car Compatible
1/8 Buggy, Truck and Monster
Motor Limits
2-4S Lipo KV≤3000,2-6Poles
2-6S Lipo KV≤2400, 2-4Poles
Resistance
0.0002ohm
Battery Cell Count
6-18S NIMH or 2-6S LIPO
BEC Output
6V@5A
Fan
[email protected]
Weight
123g (without wire)
Size
58x41x38mm (LxWxH)
SKY RC TORO X8 PRO V2 SK-400028
X8 Pro V2 motor is the updated version of X8 Pro, adds “adjustable timing” function. This series sensored brushless motor is designed for 1/8 scale competition buggy, equipped with 5mm shaft, 12-slot stator and 4-pole motor. It supports both sensorless and sensored Speed Controller.
KV (RPW/Volt) = 2150
Watts = 2400
Max Voltage = 21V
Max Current = 114A
I (R) = 0.0063 ohms
Max RPM = 45000
Turns = 4D
Adjustable timing = yes, 20°- 40° CCW, 40°- 20°, 30° neutral point
High RPM oversized bearings = Yes
T6 Aluminum Shell with CNC Forming Process
High Torque Motor with 12-Slot Stator and 0.2mm Silicon-steel Sheets
Neodymium Sintered Magnet Rotor
High Power Welding Pieces
Durable Bearing with High RPM’s
Pure Copper Coil with High Conductivity
Reinforced 5mm Shaft
Replaceable Rotor
ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG, Control Angle 270°
Features:
- High-precision metal gears with hard anodizing
- CNC aluminium middle Shell,
- water proof rubber seals screws
Specification:
Brand: DSSERVO
Item: DS3218MG
Stall Torque (5V): 19 kg/cm (263.8oz/in)
Stall Torque (6.8V): 21.5 kg/cm (298.5 oz/in)
Dead band: 3μs
Speed : 0.16 sec/60°(5V) / 0.14 sec/60°(6.8V)
Operating Voltage: 4.8 ~ 6.8 DC Volts
Weight: 60 g (2.12 oz)
Motor Type: DC Motor
Gear Type: Copper & Aluminum
Working frequence: 1520μs / 333hz
CE Certification: Yes
Size: 40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in)
SP Racing Tires (world famous Italian made GT tires)
Specifications: 4 x 1/8 Rally Games Hard compound tires
Delta Plastiks Pre-painted body
Specifications: 0177 Delta Plastik - Maserati MC12 Corsa (Europa) 1/8 Scale GT RC car body
Serpent SRX8 GTe 1/8
th
scale electric GT car
When it comes to road course racing, chassis width and corner clearance is huge, this controls the lean and body roll in all directions. In addition to that, the roll and lean angles ultimately control the maximum cornering force. We kept the chassis the narrowest in nature that was possible, while increasing the corner clearance. However, we took it another step further. We pioneered the front of the chassis to adhere to the ROAR and IFMAR rules of a minimum kick-up angle, while increases clearance, for curbs, uneven track and under heavy braking. This also allows for a nice mounting surface and easy to find body posts as they will be facing fully vertical. All these great design concepts are nicely nestled in a 7075-t6 aluminum alloy chassis. This chassis will take the abuse and stand the test of time.